Panasonic DVCPRO AJ-BS901EN, Руководство по эксплуатации

Страница: 8 / 26

8
=
MIC button
This button is used to switch the intercom microphone on and off. It has three positions: ON, OFF, and PTT. (PTT: Audio
transmission continues as long as the button is held down.)
<
INTERCOM level knob
This knob is used to adjust the volume of the microphone
input to the intercom.
Parts and their functions
Front panel
GENLOCK
VTR
ENABLE REW
SET UP
MON SEL
KNEE
POINT
KNEE
SLOPE
ON
OFF
(PUSH)
OFF SC H
PHASE
INTERCOM
PGM
ON
OFF
PTT
MIC
PRIVATE
SYSTEM
PUSH
PHASE
ON
OFF
R
G
B SUP
RIAX
9
:
;
<
?
@
>
=
9
Intercom XLR connector
This is used to connect a headset to the intercom.
:
PGM level knob
This knob is used to adjust the volume of the PGM audio
mixed into the signal fed to the intercom headset.
?
Phase adjustment buttons
These buttons are used to adjust the phase selected using the phase adjustment switch > .
;
SYSTEM/PRIVATE selector switch
This is used to toggle the intercom between the system and
private modes.
SYSTEM: The intercom is connected to the system via the
communication connector on the rear panel of
the unit.
PRIVATE: The intercom is not connected to the system via
the communication connector on the rear panel
of the unit.
<Note>
When this unit is used without the camera head (AJ-CA901
camera adapter and AJ-SDX900 camera recorder)
connected, the conditions for PRIVATE are established,
irrespective of the setting of this switch.
>
Phase adjustment switch
The available settings are SC PHASE, OFF, and H PHASE.
SC PHASE: Selects SC phase adjustment.
OFF: No phase adjustment is performed.
H PHASE: Selects H phase adjustment.
@
GEN LOCK indicator
This indicator lights when the camera’s synchronization is locked using the signal input via the GEN LOCK connectors on the
rear panel.