Panasonic DP-C406, Руководство по эксплуатации

Страница: 58 / 106

58
Chapter 4 Fax/Email Settings
„ No. 160 - 184
158 PC Remote Update Set whether to accept commands from an Email
application to:
(a) Program the Internet Parameters
(b) Program the Auto Dialer
(c) Allow retrieval of the Journal
z Consult with the authorised Panasonic dealer
on how to use this item.
Invalid, Valid Invalid
No. Parameter Comments Selective Item Standard
Setting
160 Default Domain Set whether the machine accepts to insert the
default domain when entering the part of Email
address preceding at mark (@).
Set “
Valid ” to add a domain name automatically
to an Email address whose domain name was
omitted.
Invalid, Valid Valid
162 TIFF Viewer URL Set a language for a URL address included in
the Email message.
Set “
None ” to insert no URL address.
None, English,
Eng+Jpn English
163 Routing Header Set whether to add the header information of
the routing station.
Set “
Valid ” to add the header information of the
routing station.
Invalid, Valid Invalid
164 IFax XMT Header Set whether to include the header when
sending an original to an address in the same
domain as specified in the Default Domain
parameter. (This is useful when using the
machine to scan originals back to your PC.)
z
When sending to a Domain other than as
specified in the Default Domain parameter,
the header will be included regardless of the
selection.
Set “ Included ” to use Cc or Bcc.
Included, Not Inc. Included
172 Direct IFax XMT Set whether to be prompted during Address
Book registration if the station you are
programming is to receive Internet Fax directly
without going through a mail server. Invalid, Valid Invalid
173 Delivery Notice Set whether to request a Message Disposition
Notification (MDN) for a delivery processing
confirmation indicating that the transmitted
original (Email/Internet Fax) was read.
This notice can be set at every transmission.
When this notice is returned from the recipient,
the communication result is recorded in the
communication journal. Off, On Off
No. Parameter Comments Selective Item Standard
Setting