Recording
SQT0989
31
1
Press [PROG/CHECK].
2
Select “New Timer Programme”, then press
[OK].
To confirm and edit the timer programme
Refer to “To confirm and edit a timer programme”.
(
>
33)
Operation during Recording
Refer to “Operation during Recording”. (
>
28)
• Signal Supported Recording is disabled when a manually
programmed timer recording is set.
Select the items and change the items.
Channel
• You can select Category with the red button.
Start/Stop
• Press and hold [
3
,
4
] to alter in 15-minute
increments.
Mode/Conv.
Refer to step 2. (
>
27)
Subtitles
You can choose whether or not to record the
subtitle at conversion.
(Only when item other than “OFF” is selected in
“Conv.”)
Title Name
1 Select “Title Name”, then press [OK].
2 Refer to “Entering text”. (
>
79)
To use Signal Supported Recording
You can choose whether or not to use the Signal
Supported Recording function by pressing the
blue button.
Manually programming timer
recording
3
Select the items and change the items.
(
>
right, Timer recording options)
4
Press [OK].
The timer programme is stored.
Channel Name
Schedule
Mode
Space
Timer Recording
30:30 DR
HDD
TUE 06.01.2015 8:05
New Timer Programme
Channel Name
Schedule
Mode
Space
Timer Recording
30:30 DR
HDD
TUE 06.01.2015 8:05
New Timer Programme
OK
Programme Name
WED 07.01
8:00 - 9:00
DR
Timer recording options
Day/Date
• You can select “Date” or “Weekly” by pressing
the green button.
• Auto Renewal Recording
(Only daily/weekly timer recording)
The unit will record the new programme over
the old one.
Press the yellow button.
“Renew : ON” is displayed.
Timer Recording
TUE 06.01.2015 8:05
30:24 DR
Channel
1
WED 07.01
Day/Date
Stop
8:00
9:00
Start
RETURN
Title Name
DR
OFF
Mode
OFF
Conv. Subtitles
OK
Category
HDD
Signal Supported Rec
Date or Weekly?
Signal Supported : OFF
e.g.,
DMR-EX97EG_eng.book 31 ページ ２０１５年５月２７日 水曜日 午後５時３分
