Convenient functions
SQT0292
90
Basic Settings
Settings for DVB-C Channels
[DVB-C]
Channel List
You can edit the channel list.
• To hide/reveal channels
1 Select the channel.
2 Press [OK].
The check mark is removed/displayed.
• Red: Change the sorting mode.
• Yellow: Reveal all channels.
• Blue: Change the Category.
• To change the channel number assignment
1 Select the channel to change, then press
the green button.
2 Enter the channel number to reassign
with the number buttons.
3 Press [OK].
Manual Tuning
You can add new channels manually.
1 Adjust the frequency, symbol rate and
service ID. (For details, consult the cable
provider.)
• Adjust the frequency by checking the
signal strength and signal quality
displays.
2 Select “Start scan”, then press [OK].
• The set channel is displayed in the table.
• This function is not available during an Operator
profile update. (
>
32)
Update Channel List
You can update the channel list to the latest
one.
• This function is not available during an Operator
profile update. (
>
32)
Signal Condition
You can check the quality and strength of
signals.
Press [CH
W X
] to select the channel.
• When the signal is too strong (red bar), reduce the
CATV signal. (For details, consult your dealer or the
cable provider.)
• When the signal is weak, check that the current
broadcast channel is correctly broadcasting.
New Channel Message
Set whether to obtain the information
automatically when a new DVB channel is
added.
Settings for DVB-T Channels
[DVB-T]
Channel List
You can edit the channel list.
• To hide/reveal channels
1 Select the channel.
2 Press [OK].
The check mark is removed/displayed.
• Red: Change the sorting mode.
• Yellow: Reveal all channels.
• Blue: Change the Category.
• To change the channel number assignment
1 Select the channel to change, then press
the green button.
2 Enter the channel number to reassign
with the number buttons.
3 Press [OK].
Manual Tuning
You can add new channels manually.
1 Press [
3
,
4
] to select the frequency.
• Adjust the frequency by checking the
signal strength and signal quality
displays.
2 Press [OK] to start scan.
• The set channel is displayed in the table.
DMR-BST_BCT940EG_eng.book 90 ページ 2014年7月2日 水曜日 午後5時40分