Getting started
SQT0292
25
1
Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
3
Select language, then press [OK].
4
Select country, then press [OK].
5
Select the search mode, then press [OK].
7
Set Quick Start to “On”, “Off” or “Timer
Setting for Quick Start”, then press [OK].
[BST940]
Easy Setting
2
Press [
Í
] on the remote control or [
Í
/I] on
this unit.
• The Easy Setting will start at the initial
power on.
6
Select “Single Cable System”,
“DiSEqC
(Dual Tuner)” or “DiSEqC (Single Tuner)”
then press [OK].
When selecting “Single Cable System”
1 Make the settings of user band.
• User Band
You can set C1 to C8. Set to a User Band
not used by any other device.
• When only one User Band of the
Router is assigned, set “Tuner 2” and
“Tuner 3” to “OFF”.
Note that you will not be able to record
two programmes simultaneously.
When two User Bands of the Router
are assigned, set “Tuner 3” to “OFF”.
Note that you will not be able to record
three programmes simultaneously.
• User Band Frequency
Set the User Band Frequency with
number buttons.
• User Band PIN
If the single cable router requires a PIN
to access an user band, enter the PIN.
User Band Settings
OK
Select
RETURN
Start Auto Setup
Please confirm user band settings before starting Auto Setup.
Tuner 1
C1
1284 MHz (preset: 1284 MHz)
User Band Frequency
Off
User Band PIN
User Band
Tuner 2
C2
1400 MHz (preset: 1400 MHz)
User Band Frequency
Off
User Band PIN
User Band
Tuner 3
C3
1516 MHz (preset: 1516 MHz)
User Band Frequency
Off
User Band PIN
User Band
• For details, read the manual of the single
cable router, etc.
2 Select “Start Auto Setup”, then press
[OK].
Auto Setup starts.
These operations (Searching Satellite and
Searching Channels) may take some time.
• When selecting “DiSEqC (Dual Tuner)” or
“DiSEqC (Single Tuner)”
• When selecting “Single Cable System”
After tuning has been completed, clock will
be set automatically.
If the clock setting screen appears, set the
time manually (
>
102, Clock).
• On
It is possible to start quickly from standby
mode.
• Off
Power consumption in standby mode is
minimized. (
>
118)
However, startup time from standby mode
will be longer.
• Timer Setting for Quick Start
“Quick Start” is activated when the set time
comes.
Auto Setup
RETURN
Satellite
Progress
This will take up to 40 minutes.
Checking LNB1
Satellite
LNB in 1
LNB in 2
Press RETURN to skip Satellite installation
Searching Satellite
Checking...
Checking...
0%
100%
Auto Setup
RETURN
Satellite
Progress
This will take up to 40 minutes.
Checking LNB1
Satellite
Tuner 1
Tuner 2
Press RETURN to skip Satellite installation
Searching Satellite
Checking...
Tuner 3
Checking...
Checking...
0%
100%
DMR-BST_BCT940EG_eng.book 25 ページ 2014年7月2日 水曜日 午後5時40分