Setup
TQBS0024
86
Update Channel List
You can update the channel list to the latest
one.
Signal Condition
You can check the quality and strength of
signals.
Press [CH
W X
] to select the channel.
[DVB-C]
• When the signal is too strong (red bar), reduce the
CATV signal. (For details, consult your dealer or the
cable provider.)
• When the signal is weak, check that the current
broadcast channel is correctly broadcasting.
[DVB-T]
• The channels you can receive are affected by weather
conditions, seasons, time (day/night), region, length of
the cable that is connected to the aerial, etc.
• When the signal is too strong (red bar), reduce the
signal amplification at your aerial. (For details, consult
your dealer.)
New Channel Message
Set whether to obtain the information
automatically when a new DVB channel is
added.
Child Lock
You can restrict the viewing/playback/recording
of channels unsuitable to children.
• PIN is required to change. (
>
27)
Child Lock List
1 Select the channel or AV input to lock.
2 Press [OK].
is displayed.
• Press [OK] again to cancel.
• Green: Lock all channels.
• Yellow: Unlock all channels.
Parental Rating
Set a ratings level to limit broadcast viewing
and playback.
• Follow the on-screen instructions.
Preferred Language
Select the language for multi broadcast.
If the selected language is not available, the
original language will be selected.
HbbTV Setting
Turn on/off the HbbTV service.
• When “On” is selected, HbbTV service are
available.
[BST765]
[BST760]
DVB Tuning
Favourites Edit
(
>
84
)
Auto Setup
You can restart the Auto Setup. (
>
17)
1 Select the Auto Setup method, then press
[OK].
• Search by selected satellite
Transponders for the already found satellite
are searched for channels.
• Search all satellites
All satellites and transponders are searched
for channels.
2 Select “Yes”, then press [OK].
• The timer recording programmes are cancelled.
Settings for DVB-S Channels
Channel List
(
>
85
)
Manual Tuning
You can add new channels manually.
1 Select the items and change the items.
• Change the items by checking the signal
strength and signal quality displays.
2 Select “Start scan”, press [OK] to start
scan.
• The set channel is displayed in the table.
DMR-BST&BCT765&760EG_eng.book 86 ページ ２０１７年３月２日 木曜日 午後６時３５分
