Recording
TQBS0024
30
Recording TV
programmes
• If a timer recording reaches its start time when all tuners
are being used for recording, the recording (OTR) of one of
the programmes terminates.
• Data service will not be recorded.
• Following contents or media cannot be played back while
recording.
- video file
- photo
- USB HDD (For data files,
>
23) and USB memory
• Copying cannot be performed while recording.
• When “Automatic Standby after OTR” is set to “On” (
>
95),
this unit is turned to standby mode if this unit is not
operated for approximately 5 minutes after completing
“Automatic Stop” or “Recording Time”.
• The picture quality of encrypted programmes is not
changed until they are decrypted. (
>
32)
1 Select “Recording Time” or “Continuous
recording” in step 3 (
>
left).
Recording Time:
You can set the length of recording time from
30 minutes to 4 hours.
• You can select the recording time with
[
2
,
1
].
2 Press [OK].
• This unit can record two programmes being
broadcasted at the same time.
§
• About CI Plus restriction (
>
10)
• Notes for recording of an encrypted broadcast
(
>
32)
Preparation
You can change the recording mode (picture
quality) (
>
31)
1
Select the channel to record.
2
Press [REC
¥
].
Recording will start.
3
Select “Automatic Stop”, then press
[OK].
• One touch recording (OTR)
Recording stops automatically when the
programme ends.
§
[BST765]
[BST760]
The number of programmes that can be
simultaneously recorded varies depending on
the setup environment. (
>
12)
Recording
Automatic Stop at 8:45
REC1/OTR
Recording Time
Continuous recording
30 min
8:00 - 8:45
To set the recording time
DMR-BST&BCT765&760EG_eng.book 30 ページ ２０１７年３月２日 木曜日 午後６時３５分
