120
VQT1Z82
Q&A
Troubleshooting (Continued)
TV, computer, printer
No image appears on TV. Image blurred or not colored.
Not connected correctly (P.107, 108).
TV input setting not set to auxiliary input.
TV is not compatible with SDHC memory card. (When using SDHC memory card)
TV screen display different to LCD monitor.
Aspect ratio may be incorrect or edges may be cut off with certain televisions.
Cannot play motion pictures on TV.
Card is inserted into TV.
Connect with AV cable (supplied) or HDMI mini cable (RP-CDHM15 (1.5 m, 4.9 feet) or
RP-CDHM30 (3.0 m, 9.8 feet), sold separately)
and play on camera (P.107, 108).
Picture is not displayed on full TV screen.
Check ‘TV ASPECT’ settings (P.25).
VIERA Link (HDMI) is not working.
Is the HDMI mini cable (sold separately) connected correctly? (P.108)
Check that the HDMI mini cable (sold separately) is fully inserted.
Is the camera’s ‘VIERA Link’ setting set to ‘ON’? (P.26)
The input setting may not be able to be changed automatically with certain television
HDMI sockets. In this case, please change the input setting with your television’s
remote control (consult your television’s operating instructions for details).
Check the VIERA Link (HDMI) settings on the device you are connecting to.
Turn the camera’s power off and on again.
Turn the ‘VIERA Link control (HDMI device control)’ setting on your television
(VIERA) to ‘OFF’, and then to ‘ON’ again. (Consult your VIERA’s operating
instructions for details.)
Cannot send pictures to computer.
Not connected correctly (P.101).
Check whether computer has recognized camera.
Set ‘USB MODE’ to ‘PC’ (P.24).
Computer does not recognize card (only reads built-in memory).
Disconnect USB connection cable and reconnect with card in place.
Set mode dial to any except
.
I want to play computer pictures on my camera.
Use the supplied software PHOTOfunSTUDIO to copy pictures from computer to
camera. To save to clipboard, use software to copy from computer to card, then copy
to clipboard folder with ‘COPY’ (P.98) in PLAYBACK menu.
Cannot print when connecting to printer.
Printer not compatible with PictBridge.
Set ‘USB MODE’ to ‘PictBridge (PTP)’ (P.24).
Cannot get the date printing.
Make date printing settings before printing.
•
In shop: Make PRINT SET settings (P.96), and request printing ‘with dates’.
•
With printer: Make PRINT SET settings, and use a printer compatible with date printing.
•
With supplied software: Select ‘with dates’ within print settings.
Use ‘TEXT STAMP’ before printing (P.90).
