118
VQT1Z82
Q&A
Troubleshooting (Continued)
LCD monitor
LCD monitor dims during motion picture recording.
LCD monitor may dim if continuing motion picture recording for long periods.
Monitor sometimes shuts off even though power is on.
Camera set to ‘AUTO LCD OFF’ (P.23).
After recording, monitor shuts off until next picture can be recorded. (Approx. 6
seconds (Max.) when recording to the built-in memory)
Brightness is unstable.
Aperture value is set while shutter button is pressed halfway.
(Does not affect recorded picture.)
Monitor flickers indoors.
Monitor may flicker after turning on (prevents influence from fluorescent lighting).
Monitor is too bright/too dark.
Adjust ‘MONITOR’ setting (P.21).
Camera set to ‘LCD MODE’ (P.22).
Black/blue/red/green dots or interference appears. Monitor looks distorted when
touched.
This is not a fault, and will not be recorded on the actual pictures, so there is no need
to worry.
Date/age is not displayed.
Current date, ‘TRAVEL DATE’ (P.67), and ages in ‘BABY’ and ‘PET’ (P.55) scene
modes are only displayed for approx. 5 sec. after start-up, setting changes, or mode
changes. They cannot be always displayed.
Flash
No flash emitted.
Flash set to ‘FORCED FLASH OFF
’ (P.43).
When set to ‘AUTO
’, flash may not be emitted in certain conditions.
Flash cannot be emitted in the ‘SCENERY’, ‘PANORAMA ASSIST’, ‘NIGHT
SCENERY’, ‘SUNSET’, ‘HI-SPEED BURST’, ‘FIREWORKS’, ‘STARRY SKY’, and
‘AERIAL PHOTO’ scene modes, or when using ‘AUTO BRACKET’ or ‘BURST’.
No flash is emitted when recording a motion picture.
Multiple flashes are emitted.
Red-eye reduction is active (P.43). (Flashes twice to prevent eyes appearing red.)
The scene mode is set to ‘FLASH BURST’.
Playback
Pictures have been rotated.
‘ROTATE DISP.’ is set to ‘ON’.
(Automatically rotates pictures from portrait to landscape. Some pictures taken facing
up or facing down may be interpreted as being portrait.)
Set ‘ROTATE DISP.’ to ‘OFF’.
