Recording
- 80 -
Touch [SET].
Focus on the subject and take a picture.
A
When Burst Mode is set to high speed [H].
•
Hold down the shutter button fully to activate the
Burst Mode.
∫
Focusing in Burst Mode
The focus changes depending on the setting for [FOCUS PRIORITY]
(P144)
in the
[CUSTOM] menu and the setting for [FOCUS MODE]
(P132)
in [REC] mode menu.
¢
1 When subject is dark, the focus is fixed on the first picture.
¢
2 The burst speed may become slower because the camera is continuously focusing on the
subject.
¢
3 Burst speed takes priority, and focus is estimated within possible range.
Note
•
When the burst speed is set to [H] (when [FOCUS MODE] is [AFS] or [MF]), the exposure and
White Balance are fixed at the settings used for the first picture for the subsequent pictures as
well. Depending on the brightness of the subject, the second picture and subsequent pictures
may be brighter or darker. When the burst speed is set to [H] (when [FOCUS MODE] is [AFC]),
[M] or [L], they are adjusted each time you take a picture.
•
If you are following a moving subject while taking pictures in a place indoors, outdoors etc.
where there is a large difference between the light and shade (landscape), it may take time until
the exposure is stable. If burst is used at this time, the exposure may be compensated
incorrectly.
•
Since the shutter speed becomes slower in dark places, the burst speed (pictures/second) may
become slower.
•
When set to [H], the Auto Review function is activated regardless of the Auto Review setting.
(Will not hold) The Auto Review function in the [SETUP] menu is disabled.
When set to [M] or [L], Live View is displayed between burst frames.
•
When the flash is activated, you can take only 1 picture.
•
The Burst Mode is disabled when White Balance Bracket is set.
•
The Burst Mode is disabled during recording of the motion pictures.
Focus Mode
Focus Priority
Focus
AFS
ON
At the first picture
OFF
AFC
¢
1
ON
Normal focusing
¢
2
OFF
Predicted focusing
¢
3
MF
—
Focus set with Manual Focus
A
