21
VQT1S36
Preparation
Note
•
The clock is displayed when [DISPLAY] is pressed several times during recording.
•
You can set the year from 2000 to 2099.
•
If the clock is not set, the correct date cannot be printed when you stamp the date on the
pictures with [TEXT STAMP]
(P101)
or order a photo studio to print the pictures.
•
If the clock is set, the correct date can be printed even if the date is not displayed on the screen of the camera.
Setting the Menu
The camera comes with menus that allow you to set the settings for taking pictures and
playing them back just as you like and menus that enable you to have more fun with the
camera and use it more easily.
In particular, the [SETUP] menu contains some important settings relating to the camera’s
clock and power. Check the settings of this menu before proceeding to use the camera.
∫
Functions that cannot be set or will not work under some conditions
Due to the camera’s specifications, it may not be possible to set some of the functions or
some functions may not work in some of the conditions under which the camera is used.
For details, refer to
P130
.
[MODE] playback mode menu
(P40
,
94
to
96
)
A
[REC]/[PLAYBACK] selector switch
•
This menu lets you
select the setting of
the playback methods
such as playback or
slide show of only the
pictures set as
[FAVORITE] .
(
[PLAYBACK] mode menu
(P99
to
111
)
!
[REC] mode menu
(P79
to
93
)
•
This menu lets you
make the rotation,
protection, trimming
or DPOF settings, etc.
of recorded pictures.
•
This menu lets you
set the coloring,
sensitivity, aspect
ratio, number of pixels
and other aspects of
the pictures you are
recording.
[SETUP] menu
(P24
to
29
)
•
This menu lets you perform the clock settings, select the operating
beep tone settings and set other settings which make it easier for you
to operate the camera.
•
The [SETUP] menu can be set from either the [REC MODE] or
[PLAYBACK MODE].
DMC-FZ28P_PC.book 21 ページ ２００８年７月２日 水曜日 午後１１時１４分
