Connecting to other equipment
97
VQT1J59
[PAGE LAYOUT] to [
] and then set
[NUM. OF PRINTS] to 4 for the picture
that you want to print.
•
When printing different pictures on
1 sheet of paper
For example, if you want to print 4 different
pictures on 1 sheet of paper, set
[PAGE LAYOUT] to [
] and then set
[COUNT] in [DPOF PRINT] (P83) to 1 for
each of the 4 pictures.
• Do not disconnect the USB connection
cable when the cable disconnection
warning icon [
] is displayed.
(Depending on the printer, the icon may
not be displayed.)
• If the remaining battery power becomes
low while the camera and the printer are
connected, the status indicator blinks and
the alarm beeps. If this happens during
printing, press [MENU/SET] and stop
printing at once. If not printing, disconnect
the USB connection cable.
• The camera is receiving an error message
from the printer when the [
¥
] indication
lights orange during printing. After
finishing printing, make sure there are no
problems with the printer.
• If the total number of DPOF prints or the
number of DPOF pictures printed is high,
pictures may be printed several times. The
remaining number of prints indicated may
differ from the number set. This is not a
malfunction.
• With date printing, the setting on the
printer may take priority over the setting
on the camera. Check the date print
setting on the printer also.
• The message [USB MODE CHANGED.
PLEASE REMOVE THE USB CABLE.]
appears if you change the mode dial to a
mode other than [
] while the camera
and the printer are connected. Set the
mode dial to [
] again and then
disconnect the USB connection cable. If
this happens during printing, stop printing
and then disconnect the USB connection
cable.
Playing Back Pictures
on a TV Screen
∫
Playing back pictures using the AV
cable (supplied)
• Set the [TV ASPECT].
• Turn this unit and the TV off.
1
Connect the AV cable
A
(supplied) to the [AV OUT] socket
on the camera.
• Connect the AV cable with the [
]
mark facing the [
2
] mark on the
[AV OUT] socket.
• Hold the AV cable at
B
and insert
straight in or take straight out.
2
Connect the AV cable to the video
input and the audio input sockets
on the TV.
•
1
Yellow:to the video input socket
•
2
White:to the audio input socket
3
Turn the TV on and select external
input.
4
Turn the camera on.
DIGITAL
AV OUT
DC IN
DMC-FX33_ENG.book 97 ページ ２００７年７月９日 月曜日 午後２時１６分
