Advanced (Recording pictures)
- 116 -
For details on [REC] Mode menu settings, refer to
P32
.
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to real life.
Applicable modes:
·
[OFF]/[ON]
Note
•
When [ON] is set, [
] is displayed on the screen.
•
Even when the [SENSITIVITY] is set to [ISO80]/[ISO100], [SENSITIVITY] may be set higher
than [ISO80]/[ISO100] if the picture is taken with [I.EXPOSURE] set to valid.
•
Compensation effect may not be achieved depending on the conditions.
•
[
] in the screen turns to yellow when [I.EXPOSURE] is in effect.
For details on [REC] Mode menu settings, refer to
P32
.
You can take bright pictures in dark places by setting [MIN. SHTR SPEED] slower. Also,
you can set it faster to reduce the blur of the subject.
Applicable modes:
·
[AUTO], [1/125], [1/60], [1/30], [1/15], [1/8], [1/4], [1/2], [1]
Note
•
This should usually be set to [AUTO] to take pictures. (When you select a minimum shutter
speed other than [AUTO], [
] appears on the screen.)
•
Setting [MIN. SHTR SPEED] to slower speed might increase the chance of jitter, so we
recommend using a tripod and the self-timer for taking pictures.
•
Setting [MIN. SHTR SPEED] to faster speed might make the picture darker, so we recommend
recording the picture in well-lit area. If correct exposure cannot be achieved, [
] will flash in
red when the shutter button is pressed halfway.
[I.EXPOSURE]
[MIN. SHTR SPEED]
Minimum shutter speed setting
1/125
1
Brightness
Darker
Brighter
Jitter
Less
More
DMC-FT2PDF_EB.book 116 ページ 2010年2月1日 月曜日 午後6時8分