6
Installation Steps
Installation of Water Inlet Hose on
Shunt Valve Side
1
2
3
Installation of Water Inlet Hose on
Shunt Valve Side
Page 6
Installation of electric bidet seat
Page 7
Installation of Water Inlet Hose on
Body Side
Page 8
Page 10
Commissioning
Close the water inlet
valve and remove the
water inlet pipe.
Attach the shunt valve on the water
inlet hose to the water inlet valve.
Re-install the water inlet pipe.
Water inlet
pipe
Remove
Close
Use an adjustable wrench or pliers to
secure this position
Tighten with a
wrench at the
same time
Acorn nut
aligned with
the valve
Shunt valve
connection
Acorn nut
Water inlet pipe
Secure from the
bottom side with an
adjustable wrench
Tighten
Water inlet valve
Illustrated parts are those
mentioned in page 4
Water inlet hose
Water tank of
the toilet
Water inlet valve
Gasket
(Black, 2.5 mm thick)
Gasket
(Black, 4 mm thick)
Water inlet valve
Do not secure any part other than those specified
with the tool to prevent any water leak due to
damage.
Do not scratch the connection of the shunt valve
to prevent any water leak.
Do not hold the water inlet hose by your hands to
prevent injury when turning the acorn nut.
Tips
