With a PC
-57-
For Macintosh
1
Turn on Computer and start up Macintosh.
2
Insert supplied CD-ROM into the CD-ROM
drive.
3
Double click the icon of a CD-ROM that
appears.
4
Double click [ArcSoft].
5
Double click [PhotoImpression] (or
[PhotoBase] or [PanoramaMaker] or
[PhotoPrinter]).
6
Double click [English] or [French].
7
Double click [PhotoImpression Installer] (or
[PhotoBase Installer] or
[PanoramaMaker Installer] or
[PhotoPrinter Installer]).
8
Follow the instructions on the computer
screen until the installation is complete.
ª
To start software in the ArcSoft
Software Suite
1
Select [Start] >> [All Programs (Programs)]
>> [ArcSoft Software Suite] >>
[Panorama Maker 3] (or [PhotoBase 4] or
[PhotoImpression 4] or [PhotoPrinter 4]).
Refer to Help information about application
operations and other Error messages.
For Information on ArcSoft Software:
TEL: 1-510-440-9901
Web Site: www.arcsoft.com
To disconnect USB cable safely
If USB cable is disconnected while computer is
on, error dialog box may appear. In such a case
click [OK] and close the dialog box. By following
the steps below you can disconnect the cable
safely.
1
Double click the
icon in task tray.
≥
Hardware disconnect dialog box appears.
2
Select [USB Mass Storage Device] and click
[Stop].
3
Verify [Matshita DVC USB Device] is
selected and click [OK].
≥
You can safely disconnect the cable.
Note on the driver name displayed
The driver name displayed will differ depending
on your OS, operating environment and the mode
of the Palmcorder.
Windows XP/2000:
(When the Palmcorder is in Tape Recording
mode or Tape Playback Mode:)
[Panasonic DVC USB-SERIAL Driver for Win XX
(COM X)] (The numeral designation after
“Win XX” will differ depending on the OS. The
numeral after “COM” will differ depending on the
operating environment of your personal
computer.)
(When the Palmcorder is in PC Mode:)
[USB Mass Storage Device] or
[Panasonic DV DISK Port Driver]
Windows Me:
(When the Palmcorder is in PC Mode:)
[USB Disk]
≥
Some OS, such as Windows
98SE, may not
show the icon indicating that you may safely
disconnect in task tray. (OS may be set not to
show) Make sure Palmcorder’s Card Access
Lamp is off and disconnect the cable. Also, with
Windows Me, the icon will not be displayed
when in Tape Recording Mode or Tape
Playback Mode.
CAUTION:
If you disconnect the USB Cable while the
Card Access Lamp is on, it may damage the
Card data.
PV-GS55PP_Eng.book 57 ページ 2004年2月10日 火曜日 午前11時51分
Содержание Digital Palmcorder PV-GS55
Страница 175: ... 87 ...