Conv
enie
nt fun
c
tion
s
VQT3C81
79
∫
Digital Audio Output
¾
PCM Down Conversion
Select how to output audio with a sampling
frequency of 96 kHz.
≥
It will be converted to 48 kHz regardless of the
setting in the following cases.
–The signals have a sampling frequency of over
96 kHz.
–The disc has copy protection.
–“BD-Video Secondary Audio” is set to “On”.
(
[BD-V]
)
≥
If “Off” is selected, signals are output as 96 kHz
≥
If “On” is selected, signals are converted to
48 kHz.
(Choose when the connected equipment cannot
process signals with a sampling frequency of
96 kHz.)
¾
Dolby D / Dolby D + / Dolby TrueHD
¾
DTS / DTS-HD
¾
MPEG
¾
HE-AAC
Select the audio signal to output.
¾
BD-Video Secondary Audio
(
[BD-V]
with secondary audio)
Turn on/off the clicking sound on the menu and
audio with secondary video.
If “Off” is selected, the primary audio only is output.
∫
Audio Delay
Mis-sync between the video and audio is corrected by
delaying the audio output.
∫
On-Screen Information
Select the approximate time until the channel
information screen (
>
26) disappears automatically.
∫
Unit’s Display
Changes the brightness of the unit’s display.
∫
Screen Saver
This is to prevent burn-in on the screen.
≥
If “On” is selected, the masked-off area on the
screen becomes grey.
Depending on the condition of the unit (Connection,
Setting) the masked-off area on the screen becomes
grey.
∫
Blue LED
Set the lighting method for the lamp on the SD card
slot.
≥
If “SD inserted” is selected, when this unit is turned
on and SD card is inserted, the lamp is lighted.
≥
Select “PCM” when the connected equipment
cannot decode the respective audio format.
≥
Not making the proper settings may result in
noise.
Sound
Digital Audio Output
Digital Audio Output
Dolby D / Dolby D + / Dolby TrueHD
DTS / DTS-HD
MPEG
HE-AAC
BD-Video Secondary Audio
PCM Down Conversion
Display
Setup
Display
Display
On-Screen Information
Unit’s Display
Screen Saver
Blue LED
DMR-PWT500EB-VQT3C81_eng.book 79 ページ ２０１１年８月９日 火曜日 午後５時１６分
