7
RQT8850
Basic Operations
Recording Television Programs
Refer to “Important Notes for Recording” (
➔
10) and “Advanced Recording” (
➔
11 to 14) for detail information on
recording.
RAM
-R
-R DL
-RW(V)
+R
+R DL
+RW
Preparation:
• Turn on the television and select the appropriate video input to suit the
connections to this unit.
•
RAM
If the disc is protected, release protection (
➔
27).
to turn the unit on.
to open the tray
(Button located on front of the unit)
.
Insert a disc with enough remaining blank space and press
[
;
OPEN/CLOSE] again to close the tray.
–
to select desired channel.
Antenna Mode:
Cable TV Mode:
TV
REC
P
TV
REC
P
To select with the numbered buttons (
➔
6)
When no channel setting is performed on the unit and broadcast is
recorded directly from the cable box or satellite receiver, select a
channel on the connected equipment and press [INPUT SELECT]
to select “IN1” or “IN2”.
–
–
to select the recording mode.
Recording mode (
➔
11)
TV
REC
REC
REC
P
Remaining time
to start recording.
TV
REC
P
Pausing Recording
Press [
h
PAUSE].
– Press again to restart recording.
Stopping Recording
Press [
g
STOP].
Notes
-R
-R DL
-RW(V)
+R
+R DL
+RW
It takes about 30 seconds for the unit to complete recording
management information after recording finishes.
You cannot change the channel or recording mode during recording.
•
•
Tips
Icons such as “
RAM
” indicate usable
discs. Refer to pages 52 and 53.
•
RQT8850-P.indb 7
RQT8850-P.indb 7
2007/01/26 13:21:21
2007/01/26 13:21:21