64
RQT8850
On the TV
Page
Cannot finish recording
completely.
The program was copy-protected.
•
−
The disc may be full.
•
−
There are already 99 recordings (
+R
+R DL
+RW
49 recordings).
•
−
Cannot play.
You inserted an incompatible disc (discs recorded in PAL video, etc.).
•
−
Cannot record on the disc.
The disc may be dirty or scratched.
•
53
Unable to format.
Please check the disc.
Cannot record. Disc is full.
RAM
-RW(V)
+RW
Create space by erasing unwanted recordings.
Even if you erase recorded content from the DVD-R, DVD-R DL, +R
or +R DL, there is no increase in disc space. Available recording
space on a DVD-RW (DVD-Video format) or +RW disc increases
when the last recording is deleted (space may increase slightly when
you delete other recordings).
•
9, 24,
28
Cannot record. The number of
recordings has exceeded the
maximum limit.
Use a new disc.
•
−
Error has occurred. Please
press ENTER.
Press [ENTER] to start the recovery process. You cannot operate the
unit while it is recovering (“ ” (Self Check) appears on the
unit’s display).
•
−
No disc.
You haven’t inserted a disc. Correctly insert a disc that the unit can
play.
•
52, 53
The disc is upside down. If it is a single-sided disc, insert it so the
label is facing up.
•
53
Please change the disc.
There may be a problem with the disc. Press [
;
OPEN/CLOSE] on
the main unit to remove the disc to check for scratches and dirt. (The
unit turns off automatically after you open the tray.)
•
−
Please set the clock.
The clock is not set when recording programs or setting scheduled
recording. Set the clock.
•
32, 47
This is a non-recordable disc.
The unit cannot record on the disc you inserted. Insert a DVD-RAM or
unfinalized DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R
DL, or +RW disc.
•
52
The disc may be incompatible or of poor quality.
•
53
This disc is not formatted
properly.
You inserted an unformatted DVD-RAM, DVD-RW, or +RW disc.
Format the disc with the unit.
•
28
The operation is prohibited by the unit or disc.
•
−
Product Service
1. Damage requiring service
−
The unit should be
serviced by qualified service personnel if:
(a) The AC power supply cord or AC adaptor has
been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a
marked change in performance; or
(e) The unit has been dropped or the cabinet
damaged.
2. Servicing
−
Do not attempt to service the unit
beyond that described in these operating
instructions. Refer all other servicing to authorized
servicing personnel.
3. Replacement parts
−
When parts need replacing
ensure the servicer uses parts specified by
the manufacturer or parts that have the same
characteristics as the original parts. Unauthorized
substitutes may result in fire, electric shock, or other
hazards.
4. Safety check
−
After repairs or service, ask the
servicer to perform safety checks to confirm that the
unit is in proper working condition.
Product information
For product information or assistance with product
operation:
Refer to “Customer Services Directory” on page 67.
Error Messages
RQT8850-P.indb 64
RQT8850-P.indb 64
2007/01/26 13:22:04
2007/01/26 13:22:04
