RQT8016
44
Re
fe
ren
c
e
Error messages
On the television
Page
On the unit’s display
Customer Care Centre
•
For UK customers: 08705 357357
•
For Republic of Ireland customers: 01 289 8333
•
Visit our website for product information
•
E-mail: [email protected]
Direct Sales at Panasonic UK
•
Order accessory and consumable items for your product with ease
and confidence by phoning our Customer Care Centre Monday-
Friday 9:00am-5:30pm. (Excluding public holidays)
•
Or go on line through our Internet Accessory ordering application
at www.panasonic.co.uk
•
Most major credit and debit cards accepted.
•
All enquiries transactions and distribution facilities are provided
directly by Panasonic UK Ltd.
•
It couldn’t be simpler!
•
Also available through our Internet is direct shopping for a wide
range of finished products, take a browse on our website for further
details.
Cannot finish recording
completely.
•
The programme was copy-protected.
•
The disc may be full.
•
There are already 99 recorded titles (
49 recorded titles).
—
—
—
Cannot playback.
TV system is different from the
setting.
To playback, please change
the TV System in SETUP.
•
You tried to play a title recorded using a different encoding system from that of the TV system
currently selected on the unit.
Alter the “TV System” setting on this unit to suit.
39
Cannot record on the disc.
•
The disc may be dirty or scratched.
5
Unable to format.
Please check the disc.
Cannot record. Disc is full.
•
Create space by erasing any unnecessary titles.
(Even if you erase recorded content from the DVD-R or the +R, there is no increase in disc space.)
•
Use a new disc.
23, 29, 32
—
Cannot record. Maximum
numbers of titles exceeded.
Error has occurred. Please
press ENTER.
•
Press [ENTER] to start recovery process. You cannot operate the unit while it is recovering
(“SELF CHECK” appears on the unit’s display).
—
No disc
•
The disc may be upside down.
—
Please change the disc.
•
There may be a problem with the disc. Press [
;
OPEN/CLOSE] on the main unit to remove it
and check it for scratches or dirt. (The unit turns off automatically after you open the tray.)
5
This is a non-recordable disc.
•
The unit cannot record on the disc you inserted. Insert a DVD-RAM or unfinalized DVD-R,
DVD-RW (DVD-Video format) or +R.
•
You inserted an unformatted DVD-RAM or DVD-RW. Format the disc with this unit.
4, 5
33
This disc is not formatted properly.
5
•
The operation is prohibited by the unit or disc.
—
REMOTE DVD
(“
” stands for a number.)
•
The remote control and main unit are using different codes. Change the code on the remote control.
Press and hold [ENTER] and the indicated number button
at the same time for more than 2 seconds.
15
HARD ERR
•
If there is no change after turning the unit on and off, consult the dealer where the unit was purchased.
—
NO READ
•
The disc is dirty or badly scratched. The unit cannot record, play, or edit.
•
This message may appear when the lens cleaner has finished cleaning.
Press [
;
OPEN/CLOSE] on the main unit to eject the disc.
5
—
PROG FULL
•
There are already 16 timer programmes. Delete unnecessary timer programmes.
21
SELF CHECK
•
There was a power failure or the AC plug was disconnected while the unit was on. The unit is
carrying out its recovery process. Wait until the message disappears.
•
If “Quick Start” is set to “On”, “PLEASE WAIT” is displayed while the unit is carrying out its
recovery process. You cannot operate the unit while “PLEASE WAIT” is displayed.
—
—
UNSUPPORT
•
You have inserted a disc the unit cannot play or record on.
4, 5
UNFORMAT
•
You have inserted a DVD-RAM or DVD-RW that is unformatted or recorded on other equipment.
33
U59
•
The unit is hot.
The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears.
Select a position with good ventilation when installing the unit. Do not block the vent on the rear of the unit.
—
U99
•
The unit fails to operate properly. Press [
^
/I] on the main unit to switch the unit to standby.
Now press [
^
/I] on the main unit again to turn the unit on.
—
X HOLD
•
The Child Lock function is activated.
•
Press and hold [ENTER] and [RETURN] simultaneously until “X HOLD” disappears.
40
Sales and Support Information
+R
RAM
-RW(V)
Optional Accessories
Product numbers correct as of January 2005. These may be subject to change.
DVD-RAM
9.4 GB, double-sided, type 4 cartridge: LM-AD240ME (compatible with high speed recording 5X)
LM-AD240LE
(compatible with high speed recording 3X)
4.7 GB, single-sided, type 2 cartridge:
LM-AB120ME (compatible with high speed recording 5X)
LM-AB120LE
(compatible with high speed recording 3X)
4.7 GB, single-sided, non-cartridge:
LM-AF120ME
(compatible with high speed recording 5X)
LM-AF120LE
(compatible with high speed recording 3X)
DVD-R
4.7 GB, single-sided, non-cartridge:
LM-RF120ME (compatible with high speed recording 8X)
LM-RF120LE
(compatible with high speed recording 4X)
DMR-ES10-EB.fm Page 44 Tuesday, February 8, 2005 9:29 AM
