
RQT8009
8
Ge
tt
in
g sta
rt
e
d
STEP
1
Connection
•
You need to subscribe to a cable TV service to enjoy viewing their programming.
•
Consult your service provider regarding appropriate cable TV box.
The connection will allow the video cassette recorder to be used for playback when this unit is turned off. For optimum operation, it is
recommended that this unit be connected as shown below.
Connection with a cable TV box/satellite receiver and video cassette recorder
VIDEO
AUDIO
R L
S-VIDEO
OUT
RF
IN
VHF/UHF
RF IN
VHF/UHF
RF OUT
AUDIO
R
AUDIO
L
VIDEO
IN
AUDIO
R
AUDIO
L
VIDEO
OUT
OUT
IN
VHF/UHF
RF IN
AUDIO IN
R L
VIDEO
IN
indicates included accessories.
indicates accessories not included.
To household
AC outlet
(AC 120V, 60 Hz)
Television
Red White Yellow
Audio/Video cable
Splitter
75
Ω
coaxial cable
Video cassette recorder
Instead of using the Audio/video cable, you can also connect the
RF IN terminal on this unit to the cable TV box RF OUT terminal
using the 75
Ω
coaxial cable.
Audio/Video
cable
75
Ω
coaxial
cable
Cable from wall
or antenna signal
Red White Yellow
Red White Yellow
Red White Yellow
Red White Yellow
Cable TV box/
satellite receiver
Audio/Video cable
Red
White
Yellow
AC power supply cord
Connect only after all other
connections are complete.
To IN1
To IN3
■
Should I use the AUDIO/VIDEO OUT terminal
or the RF OUT terminal?
If your cable TV box has both AUDIO/VIDEO OUT terminals and
RF OUT terminals, we recommend connecting the AUDIO/
VIDEO OUT terminal with the unit’s IN1 terminal. Using this
connection provides better picture quality.
•
The S VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.
This unit’s rear panel
75
Ω
coaxial
cable
Connecting a television with S VIDEO or COMPONENT VIDEO terminals
AUDIO IN
R L
VIDEO
IN
COMPONENT
VIDEO IN
S VIDEO
IN
Television’s
rear panel
Red White Yellow
Audio/Video cable
Red White Yellow
S Video cable
This unit’s rear panel
S VIDEO OUT terminal
Connect to S VIDEO IN terminal on the television through an
S Video cable.
The S VIDEO OUT terminal achieves a more vivid picture than
the VIDEO OUT terminal. (Actual results depend on the
television.)
AUDIO IN
R L
VIDEO
IN
COMPONENT
VIDEO IN
S VIDEO
IN
Television’s
rear panel
Red White Yellow
Audio/Video cable
Red White Yellow
Video cable
This unit’s
rear panel
COMPONENT VIDEO OUT terminal
Connect to COMPONENT VIDEO IN terminals on the television
through a component video cable. These terminals can be used
for either interlace or progressive output (
➔
page 36) and provide
a purer picture than the S VIDEO OUT terminal.
•
Connect to terminals of the same color.
DMR-ES10-P_new.fm Page 8 Saturday, February 12, 2005 2:31 PM