VIDEO Plus+
Video Plus+
:enter
: access
0 - 9
: correct
: return
ENTER
RETURN
8 3 5 4 2
- - - -
Timer recording 1 / 3
Name Date Start Stop
PDC
1 BBC1 19/11
10:30 11 :30 SP ON
- - - - - - - - -. - - - - :- - - - :- - - - - -
- - - - - - - - -. - - - - :- - - - :- - - - - -
- - - - - - - - -. - - - - :- - - - :- - - - - -
- - - - - - - - -. - - - - :- - - - :- - - - - -
- - - - - - - - -. - - - - :- - - - :- - - - - -
: select
: access
: delete
: return
ENTER
CANCEL
RETURN
TIMER-controlled recordings
Programming recordings with VIDEO Plus+
!
Insert a video cassette with intact write-protection tab.
!
Press
VIDEO Plus+
.
!
Enter the VIDEO Plus+ number using the number buttons.
Use to delete a number.
!
Confirm the VIDEO Plus+ number with
ENTER
.
PDC function
If the television station sends PDC signals, the beginning and end of a recording are
synchronised with the current air time.
The programme start time must be set correctly to the start time given in the
magazine.
When recording in the NTSC system, the function may not work.
In the Timer recording screen, check the start and end time and the PDC signal.
If [- - -] is displayed under Name, use
to select the desired programme position.
!
Use
,
to select the recording mode [A, SP, LP, EP].
!
Save the programme using
ENTER
.
!
Press
TIMER
to switch the unit to timer standby mode.
The symbol lights up in the unit display.
Automatic SP/LP switching
A:
If the remaining tape time is not sufficient to start a programmed recording,
then the SP/LP function switches to the LP tape speed. This ensures that the
entire programme is recorded. If the remaining time on the tape is also not
enough in LP mode, then the programme cannot be recorded in full.
An automatic switching to EP mode is not possible.
65
