21
Auto-Setup
Ch
4
Suche Sender, bitte warten.
RETURN: abbrechen
4
Auto-Setup in progress, please wait.
RETURN: to abort
RETURN
Automatic setup starts and takes approx. 5 minutes.
The station transfer is complete when the Owner ID screen appears.
!
Switch on your television and select the AV channel.
!
Use th
.
e
Standby/on switch
to switch the unit on
The automatic setup saves all available TV stations. If the station also broadcasts
date and time, then the clock is also set automatically.
Auto-Setup
Setup without Q
Link
(Automatic tuning)
If Auto-Setup has previously been completed the DVD Recorder will not start Auto-
Setup automatically. In this case you can re-start Auto-Setup again. See page 97.
If you want to cancel Auto-Setup before it has finished, press the
RETURN
button.
You can restart Auto-Setup again. See page 97.
!
Press
to set the correct time and date and press
ENTER
to finish this setting.
If the clock setting menu appears
(Auto clock set was not possible due to a weak signal)
Mind that a wrong date or time will influence the programmed recording of TV
programmes (don't forget to change summer time and winter time).
You can complete the Owner ID now or skip this step and do it later. To do it later, press
the
RETURN
button. Your DVD Recorder is now ready to use.
!
To set the Owner ID now, use and press the
Numeric
buttons or
to enter a
four-digit PIN number. Press , to correct the digit.
!
Be sure to remember the PIN number (write it down).
!
Press the
ENTER
button twice to confirm.
!
Enter the [Name], [House No] and [Postcode] in the same way, using
.
!
Press the
ENTER
button to confirm each entry.
!
Press the
RETURN
button to leave the Owner ID screen.
!
You will now see the TV picture. Your DVD Recorder is now ready to use.
Owner ID
Clock
Off
Automatic
0
00
00
1
1
2005
:
:
.
.
Time
Date
CHANGE
ENTER
RETURN
Clock cannot be set automatically.
Please set the clock manually.
ENTER: store RETURN: leave
SELECT
0
9
No
Owner ID
RETURN
Name
House No.
Postcode
PIN number
* * * *
RETURN : leave
