18
VQT3N81
Media handling (Disc/USB memory)
1
Press [
<
OPEN/CLOSE] to open the tray.
2
Press [
<
OPEN/CLOSE] to close the tray.
Automatic drive select function
[DVD-V]
[VCD]
≥
If the unit is recording to the HDD or stopped, it automatically
switches to the DVD drive when a disc is inserted.
≥
If you eject a disc and close the disc tray, the HDD drive is
automatically selected.
≥
When using DVD-RAM or DVD-R, remove the disc from the
cartridge. Cartridge discs cannot be used.
≥
[RAM]
It is not possible to record or play continuously from one side
of a double sided disc to the other. You will need to eject the disc
and turn it over.
Inserting the USB memory
≥
Before inserting any USB memory to
this unit, ensure that the data stored
therein has been backed up.
≥
Check the orientation of the USB
connector and insert it straight in.
≥
Insert an USB device while the unit is
stopped, so the “USB device” screen
is displayed. Select an item and press
[OK] to switch to the USB-related operations (
>
34, 57).
Removing the USB memory
≥
Complete all USB-related operations and pull the USB memory
straight out.
≥
If a USB memory being accessed is pulled out, then the data may
be damaged.
∫
How to hold a disc
Do not touch the recorded surface.
∫
If there is dirt or condensation on the disc
Wipe with a damp cloth and then wipe dry.
∫
Handling precautions
≥
Be careful about scratches and dirt.
≥
Do not attach labels or stickers to discs. (This may cause disc
warping and un-balanced rotation, rendering it unusable.)
≥
Write on the label side of the disc only with a soft, oil-based felt
pen. Do not use ballpoint pens or other hard writing implements.
≥
Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥
Do not use scratch-proof protectors or covers.
≥
Do not drop stack, or impact discs. Do not place objects on them.
≥
Do not use the following discs:
– Discs with exposed adhesive from removed stickers or labels
(rental discs, etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as
heart shapes.
≥
Do not place in the following areas:
– In direct sunlight.
– In very dusty or humid areas.
– Near a heater.
– Locations susceptible to significant difference in temperature
(condensation can occur).
– Where static electricity or electromagnetic waves occur.
≥
To protect discs from scratches and dirt, return them to their cases
when you are not using them.
Inserting discs
Inserting, removing the USB memory
Insert label-up.
Note
Disc care
The manufacturer accepts no responsibility and offers no
compensation for loss of recorded or edited material due to a
problem with the unit or recordable media, and accepts no
responsibility and offers no compensation for any
subsequent damage caused by such loss.
Examples of causes of such losses are
≥
A disc recorded and edited with this unit is played in a DVD
Recorder or computer disc drive manufactured by another
company.
≥
A disc used as described above and then played again in this
unit.
≥
A disc recorded and edited with a DVD Recorder or computer
disc drive manufactured by another company is played in this
unit.
DO
DO NOT
DO
DO NOT
DO NOT
DMR-EH545EG-VQT3N81_eng.book 18 ページ ２０１１年３月２日 水曜日 午前１０時５５分
