Panasonic Diagnostec EW-BU1, Руководство по эксплуатации

Страница: 12 / 64

HOW TO USE
English
11
About each mark
To perform a correct measurement, this unit provides a movement detection
function and an irregular pulse warning function. When the marks appear, the correct
measurement might not have been obtained. If any mark appears, it is recommended to
repeat the measurement. Stay calm and relax for four to five minutes, before performing
a new measurement.
The " * " and " " mark will be recorded together with the measurement value.
Irregular pulse warning function
Movement detection function
The movement detection function is to indicate, with
, extra pressure on the cuff caused by movements
of the arm during the measurement. When movement is
detected and the measurement is completed, the mark is
displayed after flashing for approx. 6 seconds.
If the pulse rate varies by more than ±25 % from the
average while a measurement is being taken, will be
displayed when the measurement is completed. The mark
is displayed after flashing for approx. 6 seconds.
If the mark is displayed an irregular pulse rate is detected, which is not
necessarily caused by arrhythmia.
Don’t try to interpret readings or attempt to treat any condition yourself. Always
●
follow the guidance of a health professional.
However if this mark continues to display, consult your physician. ●
Advice:
In general, blood pressure measurements are lower for the second measurement
because you are less nervous and are more tranquil. For people who easily get tense,
measuring twice each time is very effective. It is recommended to store all values
when performing two measurements or more. When taking two measurements,
always stay quiet for 4 to 5 minutes after the first measurement before taking the
second measurement.
If the movements exceed acceptable levels, no reliable
measurement can be performed and the error message "U
12" will be displayed.
BU15_ASIA.indb 11 2011/05/24 19:11:40