Panasonic Diagnostec EW-BU1, Руководство по эксплуатации

Страница: 11 / 64

HOW TO USE
English
10
1.
Press .
After the entire display has been lit, the cuff
will be pressurized and measurement will be
taken automatically.
The pressure value and the time will be ●
displayed.
The
● mark will flash when pulse is
detected during pressurization.
After the measurement is completed, the
blood pressure value and pulse rate will be
displayed.
"
●
" is blinking.
According to the measurement result,
●
safety/warning marks may be displayed.
For details, refer to page11,12
2.
To store the measured values,
press .
" ● " will go from flashing to being
steadily lit.
The memory number, measurement date, ●
and time are alternately displayed.
If you do not press
● , the unit
will shut down automatically after approx.
5 minutes.
3.
To complete the measurement, press
.
Taking a reading (Measuring/Recording measurements)
This unit can store a maximum of 90 measurement values. ●
When exceeding 90 stored measurements, stored data will be overwritten, ●
beginning with the oldest data.
Finish
Start
Memory
Please start taking a reading under the condition that the power is off.
BU15_ASIA.indb 10 2011/05/24 19:11:39