- 3 -
Example of
abnormality/
failure
• Pay attention to shower temperature when reducing
the volume of water.
The shower temperature will become very hot if the
water flow rate is too low.
•
Circuit Breaker (MCB) in advance to protect the
shower Unit against possible damage.
• To ensure Pump reliability, Push On-Off Lever must
be pressed before and after each shower.
Do not pull the Push On-Off Lever, press only.
• Inspect on the built-in ELB (once a month) to avoid a
hazard to users such as damage to property, serious
injury or death. Please refer to item no. 3. TEST
OPERATION at page 11.
•
Improper grounding could cause electric shock.
• Do not insert finger or other objects into the electric
home shower Unit to avoiding physical and electric
shock hazards.
•
Shower Head
THINNER
• Never use benzene, thinner, bleaching
agent, etc. for cleaning purpose to avoid
smoke emission, ignition, fire and electric
shock hazards.
• Please make sure the O Ring is
not removed and shall be free
from foreign particle to avoid
water leaking.
• Avoid using dirty water as it may affect heater
performance and other components.
Filter
Unit
O Ring
• Do not block the Shower Head with
hand, towel or bend the hose. The
water flow rate will drop and water
temperature may become very hot.
• Take care not to damage the
holes of the Shower Plate during
the cleaning. The Rubber Packing
shall be set on the Shower Head
before fixing back the Shower
Plate to Shower Head. Do not
remove part other than Shower
Plate and Rubber Packing.
Rubber
Packing
Shower
Head
Shower
Plate
• Metallic/chrome hose and conductive valve shall
not be use.
