EN12
5. Electrical wiring
• Make sure rated electrical supply is supplied to this appliance.
• Connect the Plug to the Power Outlet.
• The Power Cord must be fi xed and placed neatly. Do not bend, twist, pull, modify, bundle the Power Cord or place
or hang anything on the Power Cord.
WARNING
ƪ
The appliance must be earthed. Make sure the Power Cord
securely connected to the Power Outlet. Improper grounding
may cause electric shock.
TEST OPERATION
WARNING
ƪ
Inspect the built-in ELB (once a month) and Safety Valve
(once a month) to avoid a hazard to users such as damage to
property, serious injury or death.
ƪ
If the ELB Reset Knob cannot be reset even if you push it
up or if it soon slides down during operation, do not use the
appliance and contact an authorized dealer immediately to
avoid a hazard to users such as damage to property, serious
injury or death. Never fi x the ELB Reset Knob forcibly with
tape and such.
1. Before operation
• Before switching on the electrical supply, make sure the Storage Tank is full with water by turning on the Hot
Water Faucet at one of the Mixer Tap and the water is in steady fl ow.
• Switch on the Miniature Circuit Breaker (MCB).
• Switch on the ON/OFF DP (Double Pole) Switch.
• Both ELB LED (red) and 75
°C LED (orange) will light up. (Push up the ELB Reset Knob if it is down)
• Push the ELB Test Button.
- It is normal if the ELB LED goes off (the ELB Reset Knob falls) and push the ELB Reset Knob up.
- Inspect the built-in ELB (once a month) to avoid a hazard to users such as damage to property, serious injury
or death.
ELB Reset
Knob
Push
• Lift up the lever on the Safety Valve to check whether the water is fl owing at the Drain Valve End.
Lever
- It is normal for water to drip from the Drain Valve End, then push down the lever on the Safety Valve.
- Inspect the Safety Valve (once a month) to avoid a hazard to users such as damage to property, serious injury
or death.
2. During operation
• After the 75
°C LED (orange) goes off, turn on the Cold Water Faucet fi rst then turn on the Hot Water Faucet and
adjust to desired water temperature.
• Check if water leaks from the pipe line.
DH-30_20_15HAM_ENVT.indb 12
DH-30_20_15HAM_ENVT.indb 12
6/17/2019 1:40:41 PM
6/17/2019 1:40:41 PM
