Panasonic DBS 576HD Скачать руководство пользователя страница 77

Страница: 77 / 370

Section 700 - Operation

Chapter 7. SLT Features

576-50-700

DBS 576HD (USA) issued September 2001

3-59

Third-Party Voice Mail Support

Description

The System supports third party Voice Mail systems with features such as:

•

Answer Supervision for Voice Mail

•

Call Forward ID Code for Voice Mail

•

Direct Inward Dial (DID)/DNIS/Direct Dial Inward (DDI) ID Code for Voice Mail

•

Disconnect Signal

•

High Priority Message Waiting

•

Message Key ID Code

Answer Supervision for Voice Mail

Description

This feature allows the System to send an answer signal to third-party Voice Mail systems.

Without this feature a third-party Voice Mail cannot receive a signal indicating that a System

extension has answered. In other words, to determine that the extension has answered, the Voice Mail

system would have to wait until the extension stops receiving ringback tone. As a result, waiting for

the ringback to stop often delays connection times for calls from Voice Mail to extensions. By sending

an answer signal, this feature provides quicker response time between the DBS 576HD and the Voice

Mail system.

Hardware Requirements

•

AEC Port

Related Programming

•

FF1-0 23: Voice Mail Answer Supervision ID Code

•

FF3-0: SLT Voice Mail Connection

•

FF1-101: DTMF ON/OFF Pattern 2

Considerations

•

The digits used for the answer signal code are determined by the requirements of the Voice Mail

system.

•

The answer code may be up to 4 characters and consist of the characters 0 - 9, *, #, and pause.

•

If the called extension does not answer and is forwarded to Voice Mail, the System sends a Call

Forward ID code back to the Voice Mail system.

•

During transmission of the answer signal code, other DTMF digits and functions from the DBS

576HD extension are ignored.

•

The Voice Mail port must be assigned as a Voice Mail port connection.

•

The DTMF pattern is set as pattern 2.

Call Forward ID Code for Voice Mail

Call Forward ID Code for Voice Mail allows you to call forward to a third-party Voice Mail system.

The ID Code sends the digits that are required by the Voice Mail to identify the System extension.

Содержание DBS 576HD



















































































































































































































































































































































































Результаты поиска

Содержание DBS 576HD

Отзывы:

Бренды по названию

Популярные бренды

Panasonic DBS 576HD, Техническое руководство

Результаты поиска

Содержание DBS 576HD

Отзывы:

Бренды по названию

Популярные бренды