Panasonic DBS 576HD страница 281 Скачать руководство пользователя

Страница: 281 / 370

Section 700 - Operation

Chapter 7. SLT Features

576-50-700

DBS 576HD (USA) issued September 2001

7-5

Non-Verified Account Codes can be assigned to outgoing calls. The user either enters the Code before

accessing an outside line (for forced or voluntary Codes).

Verified Account Codes

Verified Account Codes entered by phone users must match a 4-digit or 10-digit code that has been

preprogrammed into an Account Code Table. Depending on the setting, the user can enter anything

from 1-4 digits or 1-10 digits. These codes can also be either forced or voluntary. You can program

these codes with their own Toll Restriction Service (TRS) Class assignment so that, when entered,

they will override the extension’s TRS Class. Thus, Verified Account Code users can “float” from

phone to phone, placing calls that would normally be restricted on that phone.

Non-Verified Account Codes

Non-Verified Account codes are voluntary codes. (i.e., You do not have to enter an account code

before making a call.)

You can assign Non-Verified Account codes to outgoing calls only. To assign an account code to an

outgoing call, you enter the account code before making the call.

Operation

To enter an account code before making a call:

Verified Account Codes

Stations restricted from outside call origination by Toll Restriction Service (TRS) can be allowed to

make outgoing calls by entering a Verified Account code that changes the TRS. After a call is made,

the SMDR record for the call will show the verified account code.

Operation

To make an outside call that requires an account code:

Action

Result

1. Lift the handset.

Intercom dial tone

2. Enter the Account Code feature code (default =

3. Enter the Account Code (up to 10 digits).

4. Press the

key.

5. Enter a trunk access code.

6. Dial the phone number.

Action

Result

1. Lift the handset.

Intercom dial tone

2. Enter the Verified Account ID code (default =

3. Enter the Account Code (max. 10 digits).

4. Press the

key.

Содержание DBS 576HD



















































































































































































































































































































































































Результаты поиска

Содержание DBS 576HD

Отзывы:

Похожие инструкции для DBS 576HD

Бренды по названию

Популярные бренды

Panasonic DBS 576HD, Техническое руководство

Результаты поиска

Содержание DBS 576HD

Отзывы:

Похожие инструкции для DBS 576HD

Бренды по названию

Популярные бренды