12
VQT0N05
1
Open the Card/Battery Door at the bottom of this unit.
• Slide the Door and then open it.
2
Insert/remove the battery or the card.
• Read the next page carefully.
3
Close the Card/Battery Door.
• Close the Door and then lock it while sliding.
≥
Never open the Card/Battery Door during the access. (P16)
Otherwise, the data on the card may be damaged.
≥
When the Card/Battery Door cannot be completely closed, remove
the card or battery once and then insert it again.
≥
When you do not use the SD Multi Camera for a long time, remove
the battery.
≥
Do not use the supplied battery for other equipment.
≥
Please be sure to use genuine Panasonic batteries
(CGA-S003E/1B).
Inserting/Removing the Battery or the Card
Be sure to turn this unit off before the following operations.
Preparation
(continued)
VQT0N05Eng.book 12 ページ 2004年11月22日 月曜日 午前10時12分