Panasonic CZ-RTC5B, Руководство по эксплуатации

Страница: 8 / 60

8
(EN)
Basic Operations
1
Start operation.
Press .
(The operation indicator illuminates.)
„
To change the setting
(P.10)
„
To turn the energy saving
operation ON/OFF
Press during operation.
(Only for models equipped with the
energy saving function.)
„
Start/Stop
2
Select the item to set.
Press ◄ ►.
3
Change the setting.
Press ▲▼ → .
(The cursor disappears.)
Energy saving operation
is in process.
Operation indicator
Note
z
Operation modes that cannot be set are not displayed.
z
The swing and airflow direction on the remote control is not synchronised with the flap movement.
z
The flap display differs from the actual flap angle.
z
Pressing after recovery from mains power failure will resume operation with
the contents before mains power failure has occurred.
z
If no operation is performed for a certain period of time, the backlight turns off to
save electricity. (Press any button for illumination.)
z
The energy saving operation restricts the maximum current value, resulting in
decreased cooling/heating performance.
(If the current of outdoor units does not reach the peak due to low load operation,
the current value is not restricted.)
z
For models that cannot change the airflow direction, the airflow direction is not displayed.
z
When restricting the set temperature range (P.31)
z
The fan speed and airflow direction in cooling/drying operation can be adjusted with 3
levels if controlling using one remote controller while assigning an indoor unit (e.g. ceiling-
hung type) which has a 3-level adjustment of fan speed and airflow direction in cooling /
drying operation as main unit, and assigning a 4-way ceiling cassette type as sub unit.