Panasonic CZ-RTC4, Руководство по обслуживанию

Страница: 24 / 68

Optional Controller
Manual of Controller
2 - 6
1. Timer Remote Controller (CZ-RTC4)
8
(EN)
Note

If the heating performance is insuf

cient in Low
fan speed, change the fan
speed to Medium
or High
.

The temperature range that can be set varies depending on the model.

Temperature sensor detects temperature in the vicinity of the air inlet of the indoor unit.
The detected temperature slightly dif
fers from the room temperature
depending on the installation condition.
The set temperature is a guideline of
room temperature.
9
(EN)
1
Press and hold [SET] for more than 2 seconds to enter the present day and time setting mode.
Once you enter the setting mode, “SETTING”, “
▼
”(day) and “time”

ash.
2
Set “
▼
” to today’
s day of the week.
Press [
▲
] to move “
▼
” (

ashing on the
display) in the order of: Su
→
Mo
→
Tu
→
....
Press [
▼
] to move it in the order of: Su
→
Sa
→
Fr
→
....
Press [SET] to store.
3
Press [
▼
/
▲
] to change the present
“hour” in the range of 0 to 23*
1
.
Set the present hour and press [SET]. The “hour” digits light up, and the “minute” digits start

ashing.
* 1
If the clock uses the 12 hours
AM/PM
setting, the hour is displayed in the range of AM 1 to 12 / PM 1 to 12.
4
Press [
▼
/
▲
] to change the present
“minute” in the range of 0 to 59.
Set the present minute and press [SET].
The
day and time are set and the unit

nishes
the setting mode.
A
2 / 3 / 4
1 / 3 / 4
Note

If the present time is invalid, “– – : – –” is displayed. If the power failure occurs, check if the set data of day and time are valid.
Setting the Present
Time
Basic Operations
SM830241-00_2WAY SYS.indb 6 2015/03/26 14:54:52