37
(EN)
7
Select the operation capacity.
▲
▼
→
→
(Press 2 times to
fi
nish.)
To set in series
Repeat from step 4 without pressing
.
To change
• Select the
fi
eld to change in step 5 on the
previous page.
• Select [Change].
▲
▼
→
• Following the above steps 6 to 7, select
the start time, end time and operation
capacity.
To delete
• Select the
fi
eld to delete in step 5 on the
previous page.
• Select [Delete].
▲
▼
→
• Select [YES].
◄
►
→
→
(Press 2 times to
fi
nish.)
Note
This unit is equipped with the following 3 settings. Any of them is set at the time of
installation.
• Schedule peak cut (P.36) • External input peak cut (P.38) • Schedule energy saving (P.40)
For detailed settings, see each page.
The peak cut setting operation is the same as that for schedule peak cut.
