Panasonic CZ-64ESMC3 Скачать руководство пользователя страница 3

Страница: 3 / 64

(EN)

CAUTION

This appliance is intended to be used by expert or

trained users in shops, in light industry and on farms, or

for commercial use by lay persons.
This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved.

• Do not operate with wet hands.

• Do not wash with water.

Thank you for purchasing the Panasonic System Controller.



Read the Operating Instructions carefully for safe use. This manual describes
the Operating Instructions of the system controller. Read this manual as well as
operating instructions supplied with indoor units and outdoor units.



Be sure to read the “Safety Precautions” (P.2, 3) before using.



Keep this manual with operating instructions supplied with indoor units and outdoor
units in a safe place.



Be sure to keep this manual in a place easily accessible by users. In the case of
user change, be sure to give this manual to the new user.

NOTICE

The English text is the original instructions. Other languages are translation of the
original instructions.

Содержание CZ-64ESMC3

































































Результаты поиска

Содержание CZ-64ESMC3

Отзывы:

Похожие инструкции для CZ-64ESMC3

Бренды по названию

Популярные бренды

Panasonic CZ-64ESMC3, Руководство по эксплуатации

Результаты поиска

Содержание CZ-64ESMC3

Отзывы:

Похожие инструкции для CZ-64ESMC3

Бренды по названию

Популярные бренды