background image

31

28

E

N

G

L

I

S

H

CY-DAB2000N

Installing the Antenna

Cautions:

8

For information on where to install the antenna, call your nearest Panasonic Service Center.

8

Be sure to use the antenna supplied with the DAB tuner (CY-DAB2000N).

8

Select a point for antenna installation so that the antenna will not stick out of the car body. Otherwise,
the antenna could hit pedestrians, possibly causing an accident.

8

Install the antenna so it will not be damaged when the trunk is opened.

8

Install the antenna more than 20 cm away from other antennas.

8

If a ski carrier, for example, is mounted on the roof, install the antenna as far away from the ski carrier
as possible.

8

Do not use the cleaner for other than the specified purpose. Keep the cleaner out of reach of children
so they will not accidentally drink it.

Installing the Antenna

1. Carefully clean the antenna mounting surface using the cleaning kit. When the cleaner liquid has

dried white, wipe the surface with a dry cloth.

2. Loosen the screws with a hexagonal wrench (Fig. A).
3. Peel the paper from the antenna base, then mount the antenna on the

trunk lid (Saloon type car).

4. After mounting it, push the mounted joint with your fingers so the

antenna fits close to the car body (Fig. B).

5. After pushing it, retighten the screws securely.

Notes:

8

To make it more adhesive, dry the mounting place well before attaching the antenna.

8

If the surface temperature of the mounting place is low (less than 20 degrees), heat it with a drier, for
example.

8

After attaching the antenna, do not drive in the rain, do not expose it to water and do not pull out the
antenna within 24 hours.

t

Antenna

a

a

Loosen

There is one
more screw on
the other side.

Push

(Fig. A)

(Fig. B)

Содержание CY-DAB2000N







































Отзывы: