Panasonic CT32E14J - 32" COLOR TV, Руководство по обслуживанию

Страница: 21 / 138

NAME DESCRIPTION REGISTER
VALUE
TRAP TRAPEZOID 7D
PCCHG PINCUSHION HIGH 0B
PCCLG PINCUSHION LOW 12
PCCHS PINCUSHION HIGH 04
PCCLS PINCUSHION LOW 04
TOPSL TOP CORNER PINCUSHION SLICE LEVEL 6B
BTMSL BOTTOM CORNER PINCUSHION SLICE LEVEL 10
VEAMP VERTICAL SIZE 93
V-C VERTICAL LINEARITY 4C
V-S VERTICAL SIZE CORRECTION 09
VPOS VERTICAL POSITION 7A
NAME DESCRIPTION VALUE
ID1* ID SWITCH 1 F8
ID2* ID SWITCH 2 4F
ID3* ID SWITCH 3 77
IMPORTANT:
These table values are approximated and could change due to
variation of electrical characteristics in each set, except for the ID
switch values.
*Note:
The correspondent ID switch (ID1,ID2, ID3) data configuration
should not be modified in any way. If EEPROM circuit needs to be
replaced, these ID values should be configured according with this
table.
12. Service adjustments (electronic controls)
NOTE
Please correlate with available pattern on all adjustments
12.1. Sub-Brightness and Contrast / Service DAC adjustment
(BRIGH, CONT)
Adjustment of this control is important for setting proper operation of customer brightness and
picture controls. Do not adjust the SCREEN VR after the sub-brightness is set.
This adjustment is factory set. Do not adjust unless repairs are made to associated circuit, the
CRT Board or when the CRT is replaced.
Preparation
1. Apply a colorbar pattern.
21