Panasonic CT-1388YD, Руководство по обслуживанию

Страница: 20 / 70

- 20 -
IMPORTANT
Registers marked as FIXED in the following tables, are factory preset,
service personnel should not change the default value.
Press the power button on the remote control to select the service adjustment.
For adjustments:
Sub-Data Adjustment Adj. Range
Default
Level
B00 SUB-COLOR 0 ~ 127 33
B01 SUB-TINT 0 ~ 127 36
B02 SUB-BRIGHTNESS 0 ~ 255 127
B03 SUB-CONTRAST 0 ~ 127 20
B04 R-OFF SET FIXED 0
B05 Y NOISE REDUCTION FIXED 0
B06 Y NR LIMIT FIXED 0
Cut-Off Adjustment Adj. Range
Default
Level
C00 CUT-OFF R
0 ~ 255
1 ~ 255 0
255
C01 CUT-OFF G
0 ~ 255
1 ~ 255 0
255
C02 CUT-OFF B
0 ~ 255
1 ~ 255 0
255
C03 DRIVE R 0 ~ 127 80
C04 DRIVE B 0 ~ 127 80
C05 DRIVE G 0 ~ 127 80
C06 VERTICAL SIZE 0 ~ 255 127
C07 NOT USED N/A N/A
C08 NOT USED N/A N/A
C09 HORIZONTAL CENTER 0 ~ 31 16
C0A BEAM LIMIT 0 ~ 1 1
C0B HHS 0 ~ 7 0
C0C OSD-SHIFT FIXED 88
C0D ACL-REF FIXED 74
C0E ACL-REF FIXED 64
C0F ACL-REF FIXED 48
1.Press channel Up/Down on the
remote control to select one of
the available service adjustments
(a in see Fig. 20).
Note: Write down the original
value set (b in
see Fig. 20 ) for
each address before modifying
anything.
It is easy to
erroneously adjust the wrong
item.
2.Press volume Up/Down on the
remote control to adjust the
level of the selected service
adjustment (b in see Fig. 20).
CH
CH
CH
PW
To Item C10
CH
CH
CH