Panasonic CS-ZC15MKY-3, Руководство по обслуживанию

Страница: 30 / 45

30
13. Servicing Mode
13.1 Auto OFF/ON Button
1 OPERATION MODE
The operation will be activated immediately once the Auto OFF/ON button is pressed. This operation can be
used to operate air conditioner with limited function if remote control is misplaced or malfunctioned.
2 TEST RUN OPERATION (FOR PUMP DOWN/SERVICING PURPOSE)
The Test Run operation will be activated if the Auto OFF/ON button is pressed continuously for more than 5
seconds. A “beep” sound will occur at the fifth second, in order to identify the starting of this operation.
3 VARIOUS SETTING MODE
The Various Setting Mode will be activated if (within 20 seconds of Test Run Operation) the Auto OFF/ON
button is pressed for more than 5 seconds. 2 “beep” sounds will be heard to identify the starting of this
operation.
Under Various Setting mode, user could perform the following operation:
i) Remote control receiving sound OFF/ON
Press “Auto OFF/ON button” to toggle remote control receiving sound.
- Short “beep”: Turn ON remote control receiving sound.
- Long “beep”: Turn OFF remote control receiving sound.
After Auto OFF/ON Button is pressed, the 20 seconds counter for Remote Control Receiving Sound
OFF/ON Mode is restarted.
13.2 Remote Control Number Switch
o
There are 2 types of remote control transmission code could be selected and stored in EEPROM of
indoor unit. The indoor unit will only operate when received signal with same transmission code from
remote control. This could prevent signal interference when there are 2 indoor units installed nearby
together.
o
To change remote control transmission code, short or open jumpers at the remote control printed circuit
board.
o
During unit is OFF (remote control OFF indicator is shown), after select the transmission code
combination of remote control, press OFF/ON button for 20 seconds at remote control to transmit and
store the desired transmission code to the EEPROM.