Panasonic CS-ZC15MKY-3, Руководство по обслуживанию

Страница: 16 / 45

16
10. Installation Instruction
10.1 Select the Best Location
10.1.1 Indoor Unit

Do not install the unit in excessive oil fume area
such as kitchen, workshop and etc.

There should not be any heat source or steam near
the unit.

There should not be any obstacles blocking the air
circulation.

A place where air circulation in the room is good.

A place where drainage can be easily done.

A place where noise prevention is taken into
consideration.

Do not install the unit near the door way.

Ensure the spaces indicated by arrows from the
wall, ceiling, fence or other obstacles.

Minimum installation height for indoor unit shall be
1.1 m, recommended height is 2.5 m.
10.1.2 Outdoor Unit

If an awning is built over the unit to prevent direct
sunlight or rain, be careful that heat radiation from
the condenser is not obstructed.

There should not be any animal or plant which
could be affected by hot air discharged.

Keep the spaces indicated by arrows from wall,
ceiling, fence or other obstacles.

Do not place any obstacles which may cause a
short circuit of the discharged air.

If piping length is over the [piping length for
additional gas], additional refrigerant should be
added as shown in the table.
Piping size
Model
Horse
Power
(HP)
Gas Liquid
Std.
Length
(m)
Max
Eleva-
tion (m)
Min.
Piping
Length
(m)
Max.
Piping
Length
(m)
Addi-
tional
Refri-
gerant
(g/m)
Piping
Length
for add.
gas (m)
ZC15*** 1.75HP 5 3 15 10 7.5
ZC20*** 2.25HP
12.7
mm
(1/2”)
6.35
mm
(1/4”)
5
5 3 15 10 7.5
Example: For ZC15***
If the unit is installed at 10 m distance, the quantity of
additional refrigerant should be 25g …. (10-7.5) m x
10 g/m = 25g.
10.1.3 Indoor/Outdoor Unit Installation
Diagram