Panasonic CS-WU12VKY Series Скачать руководство пользователя страница 15

English

Information / BEE Regulation

15

Information on hazardous constituents as specified in sub-rule1 of rule16 (1) in electrical and electronic 
equipment.
Declaration of Conformity with the requirements of the E-Waste (Management) Amendment Rules 2018 
with the rule 16 (1) limits with respect to Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated 
biphenyls, Polybrominated diphenyl ethers.
The content of hazardous substance with the exemption of the applications listed in SCHEDULE II of the 

E-Waste (Management) Amendment Rules 2018 :
1. Lead (Pb) – not over 0.1% by weight;
2. Cadmium (Cd) – not over 0.01% by weight;
3. Mercury (Hg) – not over 0.1% by weight;
4. Hexavalent chromium (Cr6+) – not over 0.1% by weight;
5. Polybrominated biphenyls (PBBs) – not over 0.1% by weight;
6. Polybrominated diphenyl ethers (PBDEs) – not over 0.1% by weight.

For the purpose of recycling to facilitate effective utilization of resources, 
please return this product to a nearby authorized collection center, 
registered dismantler of recycler, or Panasonic service center when 
disposing of this product.

Customer care number ( Toll free ) :   1800 103 1333 ,1800 108 1333

Please see the Panasonic website for further information on collection centers, etc.
or call the customer care toll-free number
http://www.panasonic.com/in/corporate/sustainability/panasonic-india-i-recycle-program.html

S.No.

1.

All electrical and electronic products are required 

to  be  handed  over  only  to  the  Authorized 

recycler.

2.

The  product  should  be  handed  over  only  to 

authorized recycler for disposal.

3.

4.

5.

6.

Keep  the  product  in  isolated  area,  after  it 

becomes non-functional / un-repairable so as to 

prevent its accidental breakage. 
Provide  information  on  the  catalogue  with 

product end-of-life.
Always  dispose  products  that  have  reached 

end-of life at Panasonic India Authorized Service 

Centre.

Wherever possible or as instructed, separate the 

packaging  material  according  to  responsible 

waste disposal options and sorting for recycling.

The  product  is  not  meant  for  re-sale  to  any 

unauthorized  agencies  /  scrap  dealer  /  kabari-

walas.

The product is not meant for mixing into house-

hold waste stream.

Do not keep any replaced spare part(s) from the 

product in exposed   area.
Do not donate old electronic items to any body. 

Do  not  dispose  your  product  in  garbage  bins 

along  with  municipal  waste  that  ultimately 

reaches landfill.
Do not give e-waste to informal and unorganized 

sectors like Local Scrap Dealer / Rag Pickers.

The  product  should  not  be  opened  by  the  User 

himself  /  herself,  but  only  by  authorized  service 

personnel.

Do's

Don't

Do’s & Don’t: E-waste (Management ) Amendment Rules 2018

C

M

Y

CM

MY

CY

CMY

K

ACXF55-2303̲OL.ai   15   11/14/2018   10:08:28 AM

ACXF55-2303̲OL.ai   15   11/14/2018   10:08:28 AM

Содержание CS-WU12VKY Series

















Отзывы: