C
SLEEP/
SLEEP/
POWERFUL
POWERFUL
nanoe-G
nanoe-G
PURIFIER
PURIFIER
How to use
Press to restore the
remote control to
default setting.
Not used in normal
operations.
POWER
(Yellow Green)
TIMER
SLEEP /
POWERFUL
nanoe-G
PURIFIER
(Orange)
(Blue)
(Orange /
Yellow Green)
Remote control
display
Remote control
receiver
FAN
CHECK
nanoe-G
Press and hold for
approximately
10 seconds to show
temperature setting in
°C or °F.
Press this button for
5 seconds to switch
OFF/ON hidden display.
Use when remote control is
misplaced or a malfunction
occurs. Raise the front panel:
• To use in AUTO mode, press
the button once.
• To use in COOL mode, press
and hold the button until 1 beep
is heard, then
release.
• Press the button again to turn off.
10
SLEEP /
POWERFUL
To OFF/ON hidden temperature
display
• Press “ ” button for 5 seconds to switch OFF/ON the hidden temperature display.
• Hidden display is ON by default when unit is switched on.
• When the display is turn OFF by remote controller, It will turn ON automatically for few seconds upon
receiving any command from remote or in case of mains power reset.
To select operation mode
AUTO - For your convenience
COOL - To enjoy cool air
DRY - To dehumidify the environment
Unit run with optimised settings.
You can change the temperature according to
your comfort.
To reduce power consumption during COOL mode,
use curtains to screen off sunlight and outdoor heat.
Unit operates at low fan speed to give a gentle
cooling operation.
FAN - To operate Air-Con in “Fan Only” mode
* Indoor unit temp. display will show set temp. for
AUTO,COOL & DRY mode and room temp. for FAN
mode.
Only indoor unit fan operates as per remote settings.
Outdoor is OFF, so no cooling achieved.
Provides air circulation in the room.
C
M
Y
CM
MY
CY
CMY
K
ACXF55-2303̲OL.ai 10 11/14/2018 10:08:24 AM
ACXF55-2303̲OL.ai 10 11/14/2018 10:08:24 AM
