
105
Usage precautions
Before using this product, be sure to read all the precautions in this manual for proper use. The Company is not
liable for any defects and damages, unless legal liability is recognized, in regards to failures, incurred by use of
this product that occur through incorrect use or during use by yourself or a third party.
Security Measure
Wireless LAN uses radio waves to exchange information. Therefore, there is a risk of unauthorized access.
Initialize the APP settings on the product prior to disposal or transferring to a third party.
Before setting
Confirm the wireless router is connected to the network correctly.
Confirm the Wireless LAN of the smartphone is activated.
Smartphone and air conditioner should be connected to the same wireless router.
14.12.2 Connecting Network
Before attempting to connect to the network, ensure the modem or wireless router is working and properly connected
to allow internet access.
Press at the remote control to communicate with the home wireless LAN access point.
Wireless LAN LED from the indoor unit blinks to indicate the connection status to home access point.
Fast blink
The unit is establishing the connection.
Slow blink
The unit is not securing the connection.
No blink (stays on)
The unit has established the connection.
It can establish the connection to the unit even If the unit is turned OFF.
14.12.3 Application Installation
Note
The app user interface image may change for version upgrade without notification.
There is no charge for using this application. However, other charges may be incurred for connection and
operation.
14.12.4 To Disconnect Wireless LAN (Off Wireless LAN LED)
Press and release one time at the Remote Control Wireless LAN button and the LED will turn off. (LED ON ->
LED OFF).
14.12.5 To Delete Wireless LAN Information
If Wireless LAN is off (LED is Off), turn on Wireless LAN first by press and release one time the Wireless LAN
button. (LED OFF -> LED ON).
Push Wireless LAN button for 5 seconds.
In the Remote Control Operation select
“
5
”
and push for 3 seconds.
Initialization is finish and Wireless LAN LED will off automatically.
14.12.6 To Check Wireless Lan Signal Strength
Confirm the air conditioner operation is stopped and press the Wireless LAN button for 5 seconds.
Select “4” in the remocon then press set button and operation stops.
After 5 seconds, the signal strength is shown on the indoor unit Wireless LAN LED.
Strong Signal: Blink 3 times with an interval.
Moderate Signal: Blink 2 times with an interval.
Weak Signal: Blink once with an interval.
No Signal: OFF.
It will stop automatically after 10 minutes. To stop immediately, press Wireless LAN button.
For Android user (Android 4.4 and above)
•
Open
GET IT ON
Play
.
•
Search for Panasonic Comfort Cloud app.
•
Download and install.
For iOS user (iOS 9 and above)
•
Open
Download on the
App
Store
.
•
Search for Panasonic Comfort Cloud app.
•
Download and install.
Содержание CS-TZ20WKEW
Страница 57: ...57 11 1 4 WIFI Module Printed Circuit Board...
Страница 164: ...164 19 2 1 4 To Remove Control Board Figure 8 19 2 1 5 To Remove Cross Flow Fan and Indoor Fan Motor Figure 9...
Страница 165: ...165 Figure 10 Figure 11...
Страница 166: ...166 Figure 12 Precaution of Maintenance Removed all electrical parts before doing wet servicing...