Panasonic CS-A281KR, Руководство пользователя

Страница: 32 / 78

: Unit centre should be at more than 700 mm
at right and left of the wall.
The height should be more than 250 mm
from the ceiling.
: From installation plate end to unit left side
end is 55 mm.
: From installation plate end to unit right
side end is 55 mm.
: Indoor outdoor connecting cable should be
about 1100 mm from this line. (Only for left
rear piping)
1. Mount the installation plate on the wall with 6 screws. / (If
mounting the unit on the concrete wall, consider using anchor
bolts.)
- Always mount the installation plate horizontally by aligning
the marking-off line with the thread and using a level gauge.
2. Drill the piping plate hole with
ø
70 mm hole-core drill.
- Line according to the arrows marked on the lower left and
right side of the installation plate. The meeting point of the
extended line is the centre of the hole.
- Drill the piping hole at either the right or the left and the hole
should be slightly slant to the outdoor side.
10.2.3. TO DRILL A HOLE IN THE WALL AND INSTALL A SLEEVE OF PIPING
1. Insert the piping sleeve to the hole.
2. Fix the bushing to the sleeve.
3. Cut the sleeve until it extrudes about 15 mm from the wall.
Caution
When the wall is hollow, please be sure to
use the sleeve for tube ass’y to prevent
dangers caused by mice biting the indoor/
outdoor connecting cable.
4. Finish by sealing the sleeve with putty or caulking compound at
the final stage.
32
PDF created with pdfFactory Pro trial version www.pdffactory.com