19
CQ-VD7700U
14
E
N
G
L
I
S
H
18
CQ-VD7700U
13
E
N
G
L
I
S
H
BATTERY 5A
VIDEO-CONT
SIDE BRAKE
REVERSE
CAMERA-IN
Hide-away Unit
(Front)
(Rear)
Note:
See next page for hide-away unit
electrical connection.
Wiring Diagram
Electrical Connections
Accessory used for wiring
RGB Input Cord
To the RGB Connector of the Panasonic
car navigation system (available in future).
(Green/yellow stripe)
@5
Display Unit/Hide-away Unit Connecting Cord
(Blue/yellow stripe)
(Violet/white stripe)
(Black)
(Noise Filter)
(Yellow)
(Black)
Video Control Lead
To the Video Control Lead of the
Panasonic car navigation system
(available in future).
Side Brake (Parking Brake) Connection
Lead
Be sure to wire the side brake (parking
brake) for safety and preventing accidents.
(
a
page 22)
Reverse Lead
When connecting the rear view camera,
use the reverse lead. (
a
page 27)
Battery Lead
To the car battery, cont12 V DC.
Ground Lead
To a clean, bare metallic part of the car
chassis.
Note:
Use a Reverse Extension Cord
@3
if
needed.
(Fuse 5 A)
Camera Input
To the rear view camera
※
Remove the vinyl cap
when connecting.
Display Unit (Rear)
@2
Power Connector
Audio Output
Connector
Notes:
¡
To prevent damage to the unit, be sure to follow the connection diagram below.
¡
Be sure to fully plug in the connectors. Secure them with clamps and tape.
¡
When game machines are connected, the picture may be unstable.
¡
When removing the
Power Connector
@2
and Display Unit/Hide-away Unit Connecting Cord
@5
, be sure to press the clip.
¡
All other installation methods require the use of dedicated metal fittings. Consult with a qualified servicing engineer or your
dealer if other methods are required.
Cautions:
¡
This unit is designed for use in a car having a 12 V negative ground battery system.
¡
Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables and keep
cable terminals free from touching any metal parts.
¡
Note that if your car has a driving computer or a navigation computer, disconnecting the cable from the battery may
clear the memory.
¡
Install the cords avoiding the spots where the temperature can be extremely high.
Caution:
Do not
insert the power
connector into the
unit until the wiring
is completed.
※
@7
Ground Lead
To a clean, bare metallic part of the
car chassis
#2
Audio Cable
No.
Item
Q'ty
Power Connector (for display unit)
1
@2
Reverse Extension Cord (for rear view
camera)
1
@3
Clip Connector
1
@4
Display Unit/Hide-away Unit
Connecting Cord
1
@5
Power Connector (for hide-away unit)
1
@6
No.
Item
Q'ty
Ground Lead
1
@7
Radio Antenna Extension Cord
1
@8
Center Speaker Lead
1
@9
Center Speaker Extension Lead
1
#0
TV Antenna
1 set
#1
Audio Cable
1
#2
Note:
Ground Lead
@7
should
be grounded to the point that
is also used as the grounding
point for the display unit if you
can.
