Panasonic CQ-VX1300W Скачать руководство пользователя

Страница: 17 / 19

CQ-VX1300W

E
N

S
H

CQ-VX1300W

E
N

S
H

Error Display Messages

■

Display

Cause/Step

Troubleshooting

(continued)

Trouble

Cause/Step

No sound from left,
right, front, or rear
speaker.

Left and right sounds
are reversed in stereo
listening.

Only bass or monaural
sound from rear speaker.

SBC-SW is set to ON.

Set SBC-SW to OFF

(

page 34).

The right speaker wire is connected to the left speaker and the left speaker wire
to the right speaker.

Connect the speaker wires to the correct one

(

page 40).

Cables are not correctly connected.

Connect the cables correctly

(

page 40).

Left and right balance, or front and rear balance is off on one side.

Adjust BAL//FAD as appropriate.

■

Sound Setting

Trouble

Cause/Step

Buttons are invalid for
operation.

Remote control is in the wrong direction.

Direct the remote control at sensor (REMOTE) on the panel.

Battery has run down.

Replace the battery.

Wrong battery.

Check the battery.

Battery poles (+) (–) are reversed.

Insert the battery correctly.

■

Remote Control

Disc is dirty, or is upside down.

Open the panel and press

[

] (CD EJECT)

button. Check disc.

No operation by some cause.

Open the panel and press

[

] (CD EJECT)

button. If failure per-

sists, press the reset switch. If normal operation is not restored yet,
contact the shop where you purchased this product to ask for repairs.

Disc has scratches.

Open the panel and press

[

] (CD EJECT)

button. Check disc.

Display

Cause/Step

■

Cassette Tape

No operation by some cause.

Open the panel and press

[

] (CST EJECT)

button.

Display

Cause/Step

■

CD Changer

Disc is dirty, or is upside down.

Select the next available compact disc. Check disc.

Disc has scratches.

Select the next available compact disc. Check disc.

No operation by some cause.

Eject the magazine. If failure persists, press the reset switch. If nor-
mal operation is not restored yet, contact the shop where you pur-
chased this product to ask for repairs.

No disc is in the changer (magazine).

Insert discs into the changer (magazine).

No CD changer magazine

Insert CD changer magazine.

No disc is in the deck.

Insert a disc.

Action was taken to start playing before disc is fully ejected.

Open the panel and press

[

] (CD EJECT)

button.

Содержание CQ-VX1300W




















Результаты поиска

Содержание CQ-VX1300W

Отзывы:

Похожие инструкции для CQ-VX1300W

Бренды по названию

Популярные бренды

Panasonic CQ-VX1300W, Руководство по эксплуатации

Результаты поиска

Содержание CQ-VX1300W

Отзывы:

Похожие инструкции для CQ-VX1300W

Бренды по названию

Популярные бренды