background image

- 6 -

Maintenance/Fuse

Your product is designed and manufactured to ensure the minimum of maintenance. Use a dry, soft cloth for routine exterior 
cleaning. Never use benzine, thinner, or other solvents.

If the fuse blows out, consult your dealer, or your nearest authorized Panasonic Service Center.

Anti-Theft System

This unit is equipped with a removable face plate. Removing this face plate makes the unit totally inoperable.

Cleaning 

the Unit

Fuse

Notes:

• Do not touch the contacts on the face plate and the main 

unit, since this may result in poor electrical contact.

• If dirt or other foreign substances get on the contacts, wipe 

them off with a clean and dry cloth.

Face Plate Removing/Mounting

(Anti-Theft System)

 Warning

• Use fuses of the same specifi ed rating (

15 A

). Using substitutes or fuses with higher ratings, or connecting the unit 

directly without a fuse could cause fi re or damage to the unit. 

If the replaced fuse fails, contact your nearest 

authorized Panasonic Service Center.

Removing

1

Turn off the power.

2

Press

[

]

. The face plate will open.

3

Pull it out toward you.

4

Put the face plate in the case. 

Mounting

1

Slide the left side of the face plate in place.

2

Press the right end of face plate until a 
“click” is heard.

Содержание CQ-RX101W

























Отзывы: