background image

- 21 -

Function Settings

Function Menu

Demonstration

: On (Default)

\CQ-RX300W\  \CQ-RX200W\ 

You can set up the monitor to display or hide the 
demonstration screen.

Note:

 Button operation with either the main unit or 

remote control allows users to cancel the demonstration 
screen for 20 seconds and enable the selected operation 
even in the demo-on mode. 

: Off

Mute/Attenuation

: Volume down 

by 10 steps

You can select mute or attenuation.

: Volume off 

(Default)

\CQ-RX300W\  \CQ-RX200W\

AUX1 Skip

: On (Skip 

disabled.) (Default)

If AUX1 is not used, the AUX1 mode is skipped when 
selecting the source. 

: Off (Skip 

enabled.)

\CQ-RX105W\  \CQ-RX102W\
\CQ-RX101W\

AUX Skip

: On (Skip 

disabled.) (Default)

If AUX is not used, the AUX mode is skipped when 
selecting the source. 

: Off (Skip 

enabled.)

Notes: 

• To return to the regular mode, press 

[DISP]

.

\CQ-RX300W\  \CQ-RX200W\

• The sequence and contents of setting items may depend on the conditions of devices to be connected. For further information, 

refer to the 

System Upgrade Guidebook

 or the instruction manuals for the devices to be connected. 

1

Hold down 

[VOL] (PUSH SEL)

 for 2 sec. or more to open the function menu.

Note:

 If no operation takes place for more than 5 seconds in function setting, the display returns to the regular mode. 

2

Press

[VOL] (PUSH SEL)

 to select a mode to 

be adjusted.

3

Turn 

[VOL]

 clockwise or counterclockwise to 

adjust.

[VOL]

selects a value in the function menu.

(PUSH SEL)

 (Push to select)

selects items in the function menu.

[DISP]

 (Display)

exits from the function menu.

Содержание CQ-RX101W

























Отзывы: