Panasonic CQ-MR505N, Руководство по обслуживанию

Страница: 42 / 64

34
CQ-MR505/MR303N
24
E
N
G
L
I
S
H
Fig. 5
e
After fitting the face plate holes, try moving
the face plate up and down a few times to
make sure that it has been fitted securely.
Close the front panel and press the right
side of the face plate until a “click” is heard.
Contact
Security Indicator
The security indicator blinks when the removable face plate is removed from the unit. (See Fig.4 on the
previous page.)
Activate Security Indicator
1.
q
Press and hold [SEL] for more than 2 seconds to change to the display control mode when the
power is on.
w
Press [SEL] during the display control mode to change to the security indicator mode. (See page 14.)
e
Press [
j
TUNE] or [
i
TUNE] to turn the security indicator on or off. (LED ON or OFF)
(Default: The security indicator is on.)
Note: “LED ON” appears on the display when the security indicator is on.
2. To check whether the unit is set in the LED on mode, make sure that the security indicator blinks when
the removable face plate is removed.
Display Security Indicator Panel Removal Alarm
Blinks ON
(Press [
j
TUNE] or [
i
TUNE].)
OFF OFF
Panel Removal Alarm
This alarm sounds to warn you not to forget to remove the panel before leaving your car. This function is acti-
vated when the security indicator is on.
Note: In the display control mode, the display will be back to the previous mode with no operation for more
than 5 seconds.
Anti-Theft System
(continued)
Cautions:
1. Before removing the face plate, make sure the power is off.
2. This face plate is not water-proof. Do not expose it to water or excessive moisture.
3. Do not remove the face plate while driving your car.
4. Do not place the face plate on the dashboard or nearby areas where the temperature rises to high levels.
5. Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical
contacts.
6. If dirt or other foreign substances get on the contacts, wipe them off with clean and dry cloth.
7. Do not apply a strong downward force onto the face plate and do not put anything on it while it is open,
or it might be damaged.
e