Panasonic CQ-MR505N, Руководство по обслуживанию

Страница: 18 / 64

4
CQ-MR505/MR303N
Car for standard ISO
Precautions (ISO Connector)
¡ Wiring for the power connector conforms to the arrangement of standard ISO connectors.
¡ In case of some car types, the arrangement of connector may differ from the standard ISO
as shown in Table 1, even though ISO connectors are adopted.
¡ Make sure the ISO connector arrangement in your car side is as the same as the stan-
dard ISO. (Table 1, Fig. 1)
¡ In case of arrangement for Car type A or B, change connections of the red/yellow leads at
the re-connectable joint (
C
) as shown in Fig.1.
Table 1
Battery
(permanent 12 V supply)
“IGN” or “ACC”
(switched 12 V supply)
No Connection
“IGN” or “ACC”
(switched 12 V supply)
Battery
(permanent 12 V supply)
Battery
(permanent 12 V supply)
In case of Car type A
In case of Car type B
Fig. 1 Pin No.
A4 A7
BATTERY 15A
BATTERY 15A
BATTERY 15A
ACC
ACC
A7 F ACC/IGN Switch
+12V
A4 F +12V Battery
(Red)
ƒ
ƒ
(Red)
(Yellow) (Yellow)
A7
A4
A7 F +12V Battery
A4 F
(Yellow)
ƒ
ƒ
(Red)
(Red) (Yellow)
ACC
A7 F +12V Battery
A4 F No Connection
(Yellow) ƒ
ƒ
(Red)
(Red) (Yellow)
ACC/IGN Switch
+12V
Standard ISO
Car type A
Car type B
Fig.1
¡ After fixing the connections, the part (
C
) should be insulated with electrical tape to keep
away from unit damage.