2
④
Turn the device upside down and
then turn the screws in firmly.
⑤
Fix the HDD firmly
.
⑥
Connect the HDD cable and
power cable.
⑦
Put the cover in accordance with the
clip and then place the upper cover
back.
⑧
Secure the screws in the rear panel
and the side panel.
1.4.2 CJ-HDR416
This product supports four SATA HDDs. Please use HDD of 7200rpm or higher.
○
1
Loosen the screws of the
upper cover.
○
2
Line up the HDD to the four
holes of the HDD bracket.
○
3
Use four screws to fix HDD.
○
4
Unfasten the HDD power
cable.
○
5
Use the special data cable to
connect the HDD and the SATA port
○
6
Insert the HDD power cable.
Close the chassis and fix the
screws to secure firmly.
Important
You can connect the HDD data cable and the power cable first and then fix the HDD in the
device.
Please pay attention to the front cover. It adopts the vertical sliding design. You need to
push the clip first and then put down.